Load data for .303 Savage + .308 | 150gr | Sellier & Bellot SPCE

Recommended Powder(s): Alliant AR-Comp, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Sellier & Bellot SPCE
Manufacturer SKU:	2936
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.055" \| 26.8mm
Caliber:	.303 Savage load data
Case Length (l3):	2.014" \| 51.2mm
Cartridge Length (C.O.L.):	2.482" \| 63.0mm
Seated Depth:	0.587" \| 14.9mm
Shank Seated Depth:	0.587" \| 14.9mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	39160 psi \| 2700 bar
LID:	LID_B7223_C391
Last updated:	2025-01-01

Load data for 48 loads in caliber .303 Savage with .308 | 150gr | Sellier & Bellot SPCE bullet and 24 powders such as Alliant AR-Comp, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	83%	35215	90%	**34	100%
ADI AR 2219	<<locked>>	87%	35172	90%	**57	95%
Accurate 2015	<<locked>>	92%	34447	88%	**41	97%
Accurate 2495	<<locked>>	96%	30037	77%	**44	96%
[Accurate 2520]*	<<locked>>	97%	33997	87%	**77	92%
Alliant AR-Comp 👍	<<locked>>	96%	34954	89%	**10	99%
Alliant Reloder-10x	<<locked>>	88%	33953	87%	**34	98%
Baschieri & Pellagri 106	<<locked>>	86%	34983	89%	**69	95%
Hodgdon H322	<<locked>>	92%	35172	90%	**57	95%
[Hodgdon H335]*	<<locked>>	87%	34693	89%	**51	93%
[IMR 3031]*	<<locked>>	96%	30008	77%	**92	93%
IMR 4198	<<locked>>	86%	34954	89%	**98	99%
Norma 200 👍	<<locked>>	85%	35041	89%	**44	99%
[Norma 202]*	<<locked>>	96%	33388	85%	**34	93%
[ReloadSwiss RS 40]*	<<locked>>	90%	35085	90%	**38	92%
[Rottweil R 901]*	<<locked>>	93%	34301	88%	**21	93%
[SNPE Vectan SP 10]*	<<locked>>	87%	35157	90%	**60	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	94%	35172	90%	**82	93%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	30356	78%	**87	92%
[Somchem S335]*	<<locked>>	95%	34389	88%	**98	94%
Vihtavuori N120	<<locked>>	85%	35041	89%	**95	100%
Vihtavuori N130	<<locked>>	91%	35012	89%	**05	98%
Vihtavuori N133	<<locked>>	97%	34389	88%	**95	96%
[Vihtavuori N140]*	<<locked>>	96%	31415	80%	**65	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	33098	85%	**95	100%
[ADI AR 2219]*	<<locked>>	81%	29341	75%	**26	92%
[Accurate 2015]*	<<locked>>	81%	24221	62%	**95	93%
[Accurate 2495]*	<<locked>>	85%	20682	53%	**91	90%
[Accurate 2520]*	<<locked>>	94%	30995	79%	**11	90%
[Alliant AR-Comp]*	<<locked>>	81%	22031	56%	**59	93%
Alliant Reloder-10x	<<locked>>	81%	27296	70%	**87	95%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30153	77%	**70	93%
[Hodgdon H322]*	<<locked>>	83%	26716	68%	**54	90%
[Hodgdon H335]*	<<locked>>	82%	29022	74%	**19	90%
[IMR 3031]*	<<locked>>	91%	25802	66%	**77	90%
IMR 4198	<<locked>>	81%	29747	76%	**83	97%
Norma 200	<<locked>>	81%	30647	78%	**52	97%
[Norma 202]*	<<locked>>	91%	28776	73%	**29	90%
[ReloadSwiss RS 40]*	<<locked>>	87%	31865	81%	**72	90%
[Rottweil R 901]*	<<locked>>	87%	28456	73%	**87	90%
[SNPE Vectan SP 10]*	<<locked>>	81%	29312	75%	**26	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	28906	74%	**51	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	26716	68%	**98	90%
[Somchem S335]*	<<locked>>	86%	26281	67%	**11	90%
Vihtavuori N120	<<locked>>	81%	30821	79%	**16	100%
[Vihtavuori N130]*	<<locked>>	81%	26121	67%	**05	94%
[Vihtavuori N133]*	<<locked>>	83%	23134	59%	**13	90%
[Vihtavuori N140]*	<<locked>>	93%	28819	74%	**03	91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.